[Home ] [Archive]   [ فارسی ]  
:: Volume 20 - ::
ICOP & ICPET 2014, 20 - : 925-928 Back to browse issues page
Fabrication of Nano-Porous Photoanode Based on the TiO2 Nanoparticles by Sol-Gel Pechini Method for Use in Dye Sensitized Solar Cells
Mehri Ghasemi Mrs. * 1, Ali Mashreghi Dr.
Abstract:   (4701 Views)
In this study by using sol-gel Pechini method, the nano-porous TiO2 layer was fabricated as a photoanode of dye sensitized solar cell. In this method by adding TiO2 nanoparticles to sol that obtained by mixing citric acid, ethylenglycol and titanium alkoxide, TiO2 paste was obtained and this layer was applied by doctor-blade method on a conductive substrate. I-V curve of the cell was measured under the Xenon lamp irradiation. The results of this cell were compared with the results of cell obtained from TiO2 layer that was made by conventional method and significant improvement was observed in the pechini cell behavior. Also it was observed that by increasing the TiO2 of the paste the wettability of paste was improved.
Keywords: Dye sensitized solar cells, Nano-porous photoanode, Sol-Gel Pechini method
Full-Text [PDF 549 kb]   (1050 Downloads)    
Type of Study: Research | Subject: Special
Send email to the article author

Add your comments about this article
Your username or Email:

CAPTCHA code


XML   Persian Abstract   Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

ghasemi M, mashreghi A. Fabrication of Nano-Porous Photoanode Based on the TiO2 Nanoparticles by Sol-Gel Pechini Method for Use in Dye Sensitized Solar Cells . ICOP & ICPET. 2014; 20 :925-928
URL: http://opsi.ir/article-1-375-en.html


Volume 20 - Back to browse issues page
انجمن اپتیک و فوتونیک ایران Optics and Photonics Society of Iran
Persian site map - English site map - Created in 0.06 seconds with 30 queries by YEKTAWEB 3781