Association Mission
The mission of the association is to advance the creation, communication and application of knowledge to benefit society and improve people's lives.
Legal Members
Membership
Contact Us
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
ghasemi M, mashreghi A. Fabrication of Nano-Porous Photoanode Based on the TiO2 Nanoparticles by Sol-Gel Pechini Method for Use in Dye Sensitized Solar Cells . ICOP & ICPET _ INPC _ ICOFS 2014; 20 :925-928
URL: http://opsi.ir/article-1-375-en.html
URL: http://opsi.ir/article-1-375-en.html
Abstract: (7575 Views)
In this study by using sol-gel Pechini method, the nano-porous TiO2 layer was fabricated as a photoanode of dye sensitized solar cell. In this method by adding TiO2 nanoparticles to sol that obtained by mixing citric acid, ethylenglycol and titanium alkoxide, TiO2 paste was obtained and this layer was applied by doctor-blade method on a conductive substrate. I-V curve of the cell was measured under the Xenon lamp irradiation. The results of this cell were compared with the results of cell obtained from TiO2 layer that was made by conventional method and significant improvement was observed in the pechini cell behavior. Also it was observed that by increasing the TiO2 of the paste the wettability of paste was improved.
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
