[Home ] [Archive]   [ فارسی ]  
:: Volume 20 - ::
ICOP & ICPET 2014, 20 - : 901-904 Back to browse issues page
The combined Cooling ُSimulation of CW High Power Diode Lasers
Ehsan Farsad Mr. *1, Seyed Payman Abbasi Mr.1, Mohammad Sadegh Zabih Dr.1
Abstract:   (3704 Views)
High power diode lasers are widely used in industrial applications such as solid-state laser pumping schemes. The augmentation of the temperatures is an important issue in the optimum performance of these devices. In the present work, a numerical analysis was carried out for studying the heat transfer performance of copper porous heatsink using water- Al2O3 nanofluid destined to the cooling of 40 W CW diode laser. Results show the heat transfer rate of porous heatsink with nanofluid is more than the common heatsink with water coolant. Also the laser bar temperature decreases 9% by using porous heatsink comparison common heatsink due to the improved heat transfer coefficient by the tortuous flow path in the foam structure and increasing the effective thermal conductivity of nanofluid.
Keywords: High power diode lasers, Temperature, Porous, Nanofluid
Full-Text [PDF 665 kb]   (826 Downloads)    
Type of Study: Research | Subject: Special
Send email to the article author

Add your comments about this article
Your username or Email:


XML   Persian Abstract   Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

farsad E, Abbasi S P, Zabih M S. The combined Cooling ُSimulation of CW High Power Diode Lasers. ICOP & ICPET. 2014; 20 :901-904
URL: http://opsi.ir/article-1-363-en.html

Volume 20 - Back to browse issues page
انجمن اپتیک و فوتونیک ایران Optics and Photonics Society of Iran
Persian site map - English site map - Created in 0.05 seconds with 31 queries by YEKTAWEB 3937