Association Mission
The mission of the association is to advance the creation, communication and application of knowledge to benefit society and improve people's lives.
Legal Members
Membership
Contact Us
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Karian A, Rajaei Jafarabadi M, Hazegh Shenava M, Talesh Alikhani S. The Influence of Laser Scanning Pattern on Tensile Strength of Polypropylene Powder through the Single Layer Laser Sintering Process.. ICOP & ICPET _ INPC _ ICOFS 2015; 21 :433-436
URL: http://opsi.ir/article-1-608-en.html
URL: http://opsi.ir/article-1-608-en.html
Abstract: (3265 Views)
Nowadays, laser3D printers are one of the best and efficient devices for rapid prototyping techniques. There is vast number of studies about quality of samples in these printers. In this study, wehave tried to consider the role of laser scanning pattern in tensile strength as an important quality factor of the samples which are sintered by laser in single layer procedure. Experimental samples have been sintered with low power CO2 laser on Polypropylene powder with 200 micrometer grain size. Tensile strength and dimensional deviation of samples have been tested according to ASTM D882 standard and results are reported eventually.
Keywords: 3D laser Printer, Single layer laser sintering, scanning pattern, Tensile strength, Polypropylene powder
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
