Association Mission
The mission of the association is to advance the creation, communication and application of knowledge to benefit society and improve people's lives.
Legal Members
Membership
Contact Us
year 28, Issue 2 (ICOP & ICPET 2022 2022)
ICOP & ICPET _ INPC _ ICOFS 2022, 28(2): 302-305 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Borzouei H, Borzouei H, Kohan M. Optical design of high temperature camera. ICOP & ICPET _ INPC _ ICOFS 2022; 28 (2) :302-305
URL: http://opsi.ir/article-1-2658-en.html
URL: http://opsi.ir/article-1-2658-en.html
1- Pardis
Abstract: (492 Views)
Monitoring inside the furnace and seeing the flame with the visible camera is important for the control office. The electronic and optical components are damaged at high temperatures. In this work, the endoscopic geometry is used to see inside the furnace, and the image of the furnace is transmitted out of the furnace by the Newtonian telescope. The CCD sensor and electronic components are located outside the furnace. The part of the camera that is located in the furnace is cooled by blowing air with a pressure of 7 atmospheres and the high-temperature camera can withstand temperatures of 1100 degrees Celsius. The field of view visible by this camera is ±16 degrees and could see the 4-meter opening of the furnace, the full effective length of the burner, and the original flame to be seen in color in the control office.
Type of Study: Experimental |
Subject:
Special
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
