Association Mission
The mission of the association is to advance the creation, communication and application of knowledge to benefit society and improve people's lives.
Legal Members
Membership
Contact Us
year 28, Issue 1 (1st Iranian Conference on optical fiber sensors (ICOFS 2021) 2021)
ICOP & ICPET _ INPC _ ICOFS 2021, 28(1): 25-27 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Rahimi L, Askari A, Arjmand M, Mozafari M. Comparison of using 2-D Non-local means, median methods, and a hybrid of them in the processing of the temperature profile of a distributed fiber Raman sensor. ICOP & ICPET _ INPC _ ICOFS 2021; 28 (1) :25-27
URL: http://opsi.ir/article-1-2499-en.html
URL: http://opsi.ir/article-1-2499-en.html
1- Faculty of Applied Science, Malek-Ashtar University
2- Niroo Research Institute, Tehran, Iran.
2- Niroo Research Institute, Tehran, Iran.
Abstract: (1119 Views)
Fiber optic temperature Raman sensors are among the most important distributed sensors with many practical applications. The low power of Raman Stokes and, especially, anti-Stokes powers caused a considerable influence of the signal-to-noise ratio enhancement method on the accuracy of the measured temperature. In this paper, we have used the median and non-local means methods, and a hybrid of them, to improve the temperature profile of a fiber Raman sensor. Experimental results are presented for a 600 m fiber optic with a temperature step with a length of 20 m and located at a distance of 540 m from the entrance end of the fiber. Signal processing results show the appropriate results by respectively using the median and non-local means methods on the reduction of the temperature measurement error from 2 oC to 0.7 oC.
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
