Association Mission
The mission of the association is to advance the creation, communication and application of knowledge to benefit society and improve people's lives.
Legal Members
Membership
Contact Us
Volume 26 - ICOP & ICPET 2020
ICOP & ICPET _ INPC _ ICOFS 2020, 26 - ICOP & ICPET 2020: 269-272 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Moosavian S S, Ghoreyshi S M B, Mohammad beigi A. Design and Fabrication of Nanostructured Transparent electrode for Perovskite Solar Cell. ICOP & ICPET _ INPC _ ICOFS 2020; 26 :269-272
URL: http://opsi.ir/article-1-2032-en.html
URL: http://opsi.ir/article-1-2032-en.html
1- Department of Physics, University of Kashan
Abstract: (1643 Views)
In this study, first, MoO3/Ag/MoO3 transparent electrode with optimum thicknesses of 20/13/20 nm was designed and fabricated. The optical and electrical properties of it such as optical transmission and sheet resistance were investigated that at 550 nm wavelength, 62.8% and 4.56 Ω /cm2 were obtained, respectively. Then, after fabrication of the perovskite solar cell with Glass / FTO / TiO2 / Perovskite / CuPc structure, the designed transparent electrode by vacuum evaporation deposition method was used as cathode in solar cell. Finally, the current- voltage characterization of the fabricated perovskite solar cell with transparent cathode showed 4% efficiency. Therefore, the transparent cathode applied in this structure can be used instead of the expensive gold cathode in the Perovskite solar cells.
Keywords: Efficiency, MoO3/Ag/MoO3, Perovskite Solar Cell, Transparent electrode, Vacuum Evaporation.
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
