Association Mission
The mission of the association is to advance the creation, communication and application of knowledge to benefit society and improve people's lives.
Membership
Contact Us
Volume 26 - ICOP & ICPET 2020
ICOP & ICPET _ INPC _ ICOFS 2020, 26 - ICOP & ICPET 2020: 797-800 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Mohammadnezhad M, Dastjerdi V, Vahedi M, Zamani M. Effect of Taper Angle on Sensitivity of Tapered Optical Fiber Hydrogen Gas Sensor. ICOP & ICPET _ INPC _ ICOFS 2020; 26 :797-800
URL: http://opsi.ir/article-1-1952-en.html
URL: http://opsi.ir/article-1-1952-en.html
1- School of Physics, Iran University of Science and Technology, Tehran
Abstract: (1713 Views)
In this research, a tapered optical fiber was fabricated using single-mode optical fiber by a stretch and flame method. Then, using a magnetic sputtering method, 20 nm of palladium metal was deposited as an absorbent layer on the fiber. Spectral displacement of each fiber for various percentages of hydrogen gas (0 to 8%) was recorded in the room temperature by the optical spectral analyzer and the spectral sensitivity of 1/17×105 nm/RIU was gained. It is shown that the sensitivity is increases by increasing the taper angle.
Rights and permissions | |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |