Association Mission
The mission of the association is to advance the creation, communication and application of knowledge to benefit society and improve people's lives.
Legal Members
Membership
Contact Us
Volume 25 - ICOP & ICPET 2019
ICOP & ICPET _ INPC _ ICOFS 2019, 25 - ICOP & ICPET 2019: 657-660 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Fooladi M, Khanzadeh M, Didebanmehr M. Experimental set up and construction of the solid state side pumped Nd:YAG laser, Q switched by acousto-optic modulator. ICOP & ICPET _ INPC _ ICOFS 2019; 25 :657-660
URL: http://opsi.ir/article-1-1866-en.html
URL: http://opsi.ir/article-1-1866-en.html
1- Department of Physics, University of Vali-Asr rafsanjan, Rafsanjan
2- Laser Research Group, Did Afzar Jonoub, Shiraz
2- Laser Research Group, Did Afzar Jonoub, Shiraz
Abstract: (1538 Views)
In this research, The Nd:YAG pulsed laser with 1064 nm output wavelength has been considered experimentally. This setup is a linear cavity with 45.5 cm length that the length of the cavity is experimentally obtained. Nd:YAG laser rod has been sidely pumped and with three sides by GaAlAs diode laser arrays with 80 W maximum output power. The Q-switching was done by an Acousto-Optic Modulator (AOM) and finally, minimum laser pulse width was obtained 500 Nanosecond in 2 KHz repetition rate. In pulse mode and 80 W pumping power, maximum energy was obtained 6.2 mJ in 2 KHz repetition rate and the maximum output power was obtained 16.2 W in 20 KHz repetition rate.
Keywords: Laser pulse width, Side pumping, Q-switching, GaAlAs diode laser, Acousto-optic modulator.
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
