[Home ] [Archive]   [ فارسی ]  
:: Volume 24 - ::
ICOP & ICPET 2018, 24 - : 805-808 Back to browse issues page
Simulation Based Optimization of Optical Output for Perovskite Light Emitting Diode
Masoud Payandeh * 1, Vahid Ahmadi 1, Farzaneh Arabpour Roghabadi 1
1- Faculty of Electrical and Computer Engineering, Tarbiat Modares University
Abstract:   (54 Views)
In this work, perovskite light emitting diode (PeLED) has been analyzed using two-dimensional simulation and its optical output is optimized. The device performance is investigated as a function of the perovskite thickness, as the active layer. The result reveals that the highest luminescence can be achieved by a perovskite layer with a thickness in the range of 5-20 nm. Furthermore, the density of trap states which indicates the quality of the active layer, is considered as one of the most substantial parameters to improve the efficiency of PeLEDs. It is shown that by increasing the lifetime of the carriers from 5 ns to 500 ns as a result of density of trap states reduction from 10-12 cm-3 for polycrystalline to 10-16 cm-3 for single crystal perovskite, the maximum luminous power enhances from 2.75 W/m2 to 3.26 W/m2 i.e. 18.5% increment in luminous power.
Keywords: Perovskite light emitting diodes, two-dimensional simulation, Trap density of state, SRH recombination
Full-Text [PDF 742 kb]   (15 Downloads)    
Type of Study: Research | Subject: Special
Add your comments about this article
Your username or Email:


XML   Persian Abstract   Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Payandeh M, Ahmadi V, Arabpour Roghabadi F. Simulation Based Optimization of Optical Output for Perovskite Light Emitting Diode . ICOP & ICPET. 2018; 24 :805-808
URL: http://opsi.ir/article-1-1566-en.html

Volume 24 - Back to browse issues page
انجمن اپتیک و فوتونیک ایران Optics and Photonics Society of Iran
Persian site map - English site map - Created in 0.05 seconds with 30 queries by YEKTAWEB 3731