Association Mission
The mission of the association is to advance the creation, communication and application of knowledge to benefit society and improve people's lives.
Legal Members
Membership
Contact Us
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Hodaei A, Ahmadi V, Abaeiani G. Effect of RW length and taper angle on beam quality and threshold current density in high power tapered diode lasers. ICOP & ICPET _ INPC _ ICOFS 2018; 24 :113-116
URL: http://opsi.ir/article-1-1604-en.html
URL: http://opsi.ir/article-1-1604-en.html
1- Iranian National Center for Laser Science and Technology
2- Tarbiat Modares University
3- Photonics and Quantum Technologies School, Nuclear Science and Technology Research Institute
2- Tarbiat Modares University
3- Photonics and Quantum Technologies School, Nuclear Science and Technology Research Institute
Abstract: (2082 Views)
The effect of RW length and taper angle on the beam quality and threshold current density of a SQW Al0.07Ga0.93As 808 nm high power tapered laser diode is investigated by simulation. Results in an output optical power of 1 W shows that in taper angle of 3°, M2 factor is about 3 and in wider angles (4,5,6) ,in RW lengths of 500, 750 and 1000 μm, is increased with the slope of 0.21, 0.18 and 0.08 respectively. Threshold current density is linearly decreased in wider taper angles from 850 to 630 (A/cm2), from 730 to 570 (A/cm2) and from 520 to 330 (A/cm2) in laser diodes with RW lengths of 500, 750 and 1000 μm respectively.
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
