Figure 2. By optimizing the spatial profile of the pump beam with a spatial light modulator, it is possible to enhance the emission of the random laser into a single direction while reducing the emission in all other directions. The disordered medium used here features the same distribution of scatterers as in Figure 1.
Fortunately, it is possible to find the right pump grating without knowing how the scatterers in a random laser are distributed. The trick is to set up an optimization procedure based on a feedback loop between the pump grating profile and the laser output. The profile can be iteratively improved to produce an output that is closer to the desired specifications. We have recently demonstrated how this approach can be used to trick a random laser into emitting in a single predetermined direction.9
In our theoretical study we look at two conceptually different cases. In the first case, the random medium is strongly scattering, such that the laser modes are strongly trapped inside the medium with low lasing thresholds as a result. Since all lasing modes are already well-defined by the structure of the medium itself, the pump profile can only select one mode at the expense of all the others. To achieve unidirectional emission, we can therefore choose a pump profile that simply selects the mode with the smallest deviation from the desired far-field emission pattern to be the first lasing mode.
In the second case, where the scattering in the medium is weak, the laser modes are only weakly trapped by the medium with, correspondingly, a higher lasing threshold. In this limit, the pump profile has a much stronger influence on the lasing modes and has the potential to shape, rather than just select, them. It is here that the full potential of our optimization technique can be brought to bear.
Starting with a randomly chosen initial configuration and using a gradient-based optimization technique, we iteratively adjust the pump profile to shape the first laser mode according to a predetermined narrow angular distribution of emission. We typically require fewer than 20 initial guesses in our optimization procedure to reach a result that matches the target function to better than 95% (see Figure 2). This level of agreement, which we find based on ‘pump-shaping’ the modes, is much better than what can be achieved by simply ‘pump-selecting’ laser modes in the limit of strongly scattering media. Based on this encouraging result, we also managed to push our optimization procedure even further by making a random laser emit in two predetermined directions simultaneously.9
In all the cases we studied, the pump profiles we obtained through the optimization procedure are highly irregular. It is not evident why a specific profile leads to a given emission pattern when applied to a random medium. Clarifying this open question certainly constitutes an interesting theoretical challenge for the future. From the experimental point of view, the obvious next step would be to implement our envisioned setup with a random laser that is pumped through a spatially modulated light beam (see Figure 2). Given the exciting recent progress on the experimental side,10 we believe that our ideas can be realized with presently available setups. Such an experimental realization would not only be interesting from the fundamental physics point of view, but would also enlarge the scope of random laser applications.
We would like to acknowledge funding from the Vienna Science and Technology Fund through project MA09-030 as well as from the Austrian Science Fund through projects F25-P14 (SFB IR-ON) and F49-P10 (SFB NextLite). We are also indebted to the administration of the Vienna Scientific Cluster for free access to their computational resources.
Matthias Liertzer, Stefan Rotter
Institute for Theoretical Physics
Vienna University of Technology
Vienna, Austria
Matthias Liertzer studied physics at the Vienna University of Technology as well as at the Swedish Royal Institute of Technology and at the Swiss Federal Institute of Technology, Zurich. He is currently doing his PhD in Stefan Rotter's group, focusing on the physics of micro- and random lasers.
Stefan Rotter is a professor for theoretical physics with a research focus on nonlinear dynamics and complex scattering. With a background in the theory of mesoscopic systems, he started working on lasers during a postdoctoral fellowship at Yale University. He now leads a multigroup research effort dedicated to this topic.
References:
1. H. Cao, Lasing in random media, Waves Random Media 13, p. R1-R39, 2003.
2. D. S. Wiersma, The physics and applications of random lasers, Nat. Phys. 4, p. 359-367, 2008.
3. H. E. Türeci, L. Ge, S. Rotter, A. D. Stone, Strong interactions in multimode random lasers, Science 320, p. 643-646, 2008.
4. H. E. Türeci, A. D. Stone, L. Ge, S. Rotter, R. J. Tandy, Ab initio self-consistent laser theory and random lasers, Nonlinearity 22, p. C1-C18, 2009.
5. D. S. Wiersma, S. Cavalieri, Light emission: a temperature-tunable random laser, Nature 414, p. 708-709, 2001.
6. S. Gottardo, Resonance-driven random lasing, Nat. Photon. 2, p. 429-432, 2008.
7. X. Wu, Random lasing in weakly scattering systems, Phys. Rev. A 74, p. 053812, 2006.
8. N. Bachelard, J. Andreasen, S. Gigan, P. Sebbah, Taming random lasers through active spatial control of the pump, Phys. Rev. Lett. 109, p. 033903, 2012.
9. T. Hisch, M. Liertzer, D. Pogany, F. Mintert, S. Rotter, Pump-controlled directional light emission from random lasers, Phys. Rev. Lett. 111, p. 023902, 2013.
10. N. Bachelard, S. Gigan, X. Noblin, P. Sebbah, Turning a random laser into a tunable singlemode laser by active pump shaping, arXiv:1303.1398 [physics.optics] , 2013.
Source: https://spie.org/x103249.xml
Random lasers are exotic light sources that emit coherent light without any of the confining mirrors that are part of a conventional laser.1,2 Instead, the light inside a random laser is trapped by multiple scattering in a disordered medium and can thus be efficiently amplified. The downside is that random lasers emit their light at many different frequencies and in many different directions (see Figure 1).3,4 Scientists have therefore thought about how to ‘domesticate’ random lasers by making both their emission spectrum and directionality externally tunable.5–9 A tunable random laser holds great promise for a range of applications. It could be used as a multipurpose device with a customized functionality that is determined not by its design but rather by external control knobs.
