Association Mission
The mission of the association is to advance the creation, communication and application of knowledge to benefit society and improve people's lives.
Membership
Contact Us
Volume 25 - ICOP & ICPET 2019
ICOP & ICPET _ INPC _ ICOFS 2019, 25 - ICOP & ICPET 2019: 829-832 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Babaei tooski M, Maleki A, Ebadian H, Khalili A. Two-pulse laser design using the Master-Slave structure . ICOP & ICPET _ INPC _ ICOFS 2019; 25 :829-832
URL: http://opsi.ir/article-1-1934-en.html
URL: http://opsi.ir/article-1-1934-en.html
1- Optic and laser science & technology research center, malek- Ashtar University of technology, Shahin share, Iran
Abstract: (1545 Views)
In this paper, the design of the two-pulse laser Nd: YAG is studied using the Master-Slave structure. In this design, two heads of laser as master and slave were used in the production of a two-pulse laser beam with a time delay of several microseconds to several milliseconds with a pulse repetition rate of 1 to 15 Hz and a pulse duration 8 nanoseconds. For the channeling of these two lasers, the polarization technique using a 90 degree rotator is used. The active medium in both lasers is pumped by a flash lamp. The conversion of electrical energy to optical energy in free running and Q-switches mods is 2.33 and 1.9 percent, respectively. The experimental results are compared with the results of the LASCAD simulation and a very high adaptation has been observed.
Rights and permissions | |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |